BOWRAL DESIGNER STUDIO 20’x10′

Description

The main features at a glance:

• Stegbar glass and aluminium windows and doors, made in Australia
• Taller 2.16m wall height
• Guttering included
• Available pre-painted in 4 combinations or in 2 raw-cedar combinations
• 70 x 35mm wall framing
• Easy DIY assembly or book one of our installers
• 20 year, industry leading warranty

The BOWRAL STUDIO is designed to be an attractive addition to any property as well as providing a functional, long-lasting outdoor work space or hobby room. The BOWRAL STUDIO features a Colorbond gable roof with overhanging eaves, Colorbond guttering system, aluminium doors and two aluminium opening windows and. The wall panels consist of a 3 layer, “sandwiched” panel system – cedar then foil then hardwood ply with treated pine framing. This improves strength, with an amazing 219kmh wind rating and insulation against moisture / heat plus gives a smooth surface on the inside of the studio making it easier to paint if you decide not to line the walls.

Options including extra windows, extra doors, cedar roof lining, deck plus annex roof, as well as a full flooring kit are available.

Our CEDAR STUDIO range is manufactured in Australia, and is constructed using 70 x 35mm termite resistant pine framing and 18mm thick Canadian Western Red Cedar VJ cladding with a Colorbond steel roof. The BOWRAL is supplied in an easy to assemble kit with pre-made panels. The panels come in raw timber (not stained or painted) allowing you to select the finish of your choice. Check the bottom of this page for more cedar coating information.

Typically time required for assembly is about 11 to 15 hours, excluding the floor. The unit can be sited on a concrete base or paved area, or the subfloor kit can be used. Assembly is quite straightforward – the first step is to choose a nice level site in your yard. The floor is a base constructed either using a recommended subfloor or by laying a concrete slab. If the site is out of level the subfloor can take care of that as it comes with 75cm H4 treated stumps. Once the floor is in position the next step is to erect the pre-made walls, the panels are joined together via timber Tek screws and gables fastened into position. The roof is then assembled on the ground, lifted into position and fastened to the walls, the roof panels on the “Designer” range are in sections, making assembly easier and requiring less manpower. Next the pre-assembled aluminium doors are placed and fixed into position. Finally, the corner posts, cover strips, fascias and the ridge capping are attached to complete the product.

The BOWRAL STUDIO is supplied standard without a floor. A Subfloor Kit is available as an optional extra, this includes tough, Yellow Tongue flooring sheets as the finished surface. The Subfloor Kit provides for installation without the need for a prepared base such as a concrete slab or paved area.

The BOWRAL STUDIO features include:

• Dimensions, outside of walls: 6048mm Wide x 3132mm Deep x 2600mm High (add 140mm for HD floor kit)
• Double aluminium & glass doors are standard
• Colorbond MONUMENT or SURFIMIST roof, door and window colours as standard, optional roof colours also available
• Two opening aluminium windows included standard
• Termite resistant pine 70mm x 35mm framing
• Wind rating: Cyclone rated! W60 / N4 / C2 – 60m sec or 219 kmh winds
• Canadian Western Red Cedar 18mm thick VJ cladding
• Pre-assembled panels for quick and easy assembly
• Subfloor Kit available as optional extra
• 10 year warranty
• Delivery to your address available
• NOTE: WA, Qld, Vic and SA buyers, please check with your council before purchase, this studio is over 10 square metres. We recommend installing this as a “shed”.

List of dimensions:

• Internal Dimensions: (mm) 5916 x 3000 x 2575
• External of Frame Dimensions: (mm) 6000 x 3084 (Use this size for a slab. This will make slab slightly smaller than outside of walls, allowing rain to run off and not enter the studio)
• External of Cladding Dimensions: / Slab Size (mm)6048 x 3132
• External of Roof Dimensions: (mm) 6368 x 3432 x 2725
• Door Opening Dimensions: (mm) 1850 x 1440
• Wall Height: (mm) 2160
• Slab Note: Allow 300 mm around slab for roof overhang
• Framing: 70x 35 mm treated pine (H3-LOSP